Nishida Seikan Co., Ltd.
We plan, manufacture, and sell emergency supplies, using lightweight containers as a base.
Our company designs, manufactures, and packages wooden containers for the export of heavy goods. We developed environmentally friendly large folding plastic containers, and we use them to propose optimal folding containers for each user. These containers are adopted for domestic transport and for exports. We also apply our manufacturing technology to planning, designing, manufacturing, and selling emergency supplies. Our patented large folding plastic containers can be taken apart on all 6 sides, and can also be folded to one-quarter of the original volume. We use these containers as a base when manufacturing and selling other products. We also offer a simple folding toilet to which thermal resin processing is applied. It is made of a corrugated plastic box with sealed end surfaces and welded hinges.
[Product description] Seven characteristics of the large folding plastic container ① The special structure that all six can break. (I largely improve, and work characteristics of a load and the disposal of goods from all directions open one elsewhere, and there are specifications and all occasion specifications.) ② When fold it; the capacity to a one-fifth. (the height of the container in the case of 1,100mm) ③ Because it is lightweight, I can facilitate the resolution, assembling. (stop for assembling, the resolution, and metal fittings and the tool are not necessary at all, and and even woman one can easily work because it is lightweight.) ④ The body made of all resin has high weatherability. (the body made of polypropylene resists water resistance and can prevent the rainy invasion and moisture, too.) ⑤ I secure safer compressive strength and safety. (there is the compressive strength more than 4700kgf, and a part is excluded.) ⑥ There are high economy and compliance. (because die charges, shoe tree charges are unnecessary, I can produce size you like in cheapness and can cope with an order from small lot again and am possible even from one case.) ⑦ Parts exchange, the maintenance supports, too. (I fix exchange and the maintenance system of parts to have you use it for a long time.) Our large folding plastic containers have the following 7 features. (1) Special structure: all 6 sides can be taken apart. (This feature significantly enhances workability as it can be loaded and moved from all directions. The product can be customized to open only on 1 side, or to be entirely foldable.) (2) The volume is reduced to one-fifth when folded (in the case of a container height of 1,100 mm). (3) It is lightweight, so it is easy to assemble and disassemble. (No tools or fittings are required for assembly and disassembly. It is so light that even a person with limited strength can easily finish the task.) (4) The body is made entirely of resin, and has high weather resistance. (The polypropylene body is highly resistant to water, and prevents the infiltration of rainwater or humidity.) (5) High pressure resistance and safety are ensured. (It features pressure resistance of over 4,700 kgf, except for some models.) (6) High cost performance, and flexibility. (The cost of a metal or wooden die is unnecessary, so we can make the exact size at low cost. We support small lot manufacturing, starting from a single case.) (7) Parts replacement and maintenance services are available. (We offer parts replacement and maintenance services to prolong the operating life.) [Intellectual property] Returnable Container (Japanese Patent No. 3101700).
[Product description] The small folding plastic container is Oricon which there was not so far. The side falls down, and there is a prevention function. Seven characteristics are as follows: ① If fold it; to 10cm in height. (because I become small by folding, to be able to reduce useless space, and to be able to hold down the transportation cost, and to fold it (as for the tool an unnecessary.even as for whom because I can easily fold it quickly as for the efficiency of the work up.as for the assembling, the resolution approximately 30 seconds.) ② Small lot correspondence. (even small lot supports and it is made-to-order and can produce folding plastic container "mini-Bo" even from one case.) ③ With an adjustable size, I cope. But the height, please lower it than depth. (please let me suggest folding plastic container "mini-Bo" by dimensions, a design of the hope of the visitor and can suggest the things which I looked good with such as contents weight, form depending on the use including the small size, average light weight thing packing case.) ④ I have abundant options. (because the option of various form and materials is prepared for folding plastic container "mini-Bo", I can set the most suitable specifications depending on the needs of the visitor.) ⑤ A returnable. (not only I reduce running cost, but also becoming it leads to reduction of the garbage, the reduction of resources, reduction of the energy, and all returnables contribute to an environmental problem in making it it by a combination with large size returnable folding container "re-Bo", and a returnable realizes garbage zero.) ⑥ The side falls down, and prevention is with it. (in the lateral one which falls down, and is with prevention a shock from the outside I am pressurized, and the side falls down to the inside the damage, the loss of the contents product there is not a threat and can use it for step heaping up storage and transportation in peace.) ⑦ As security - box for use. (you can use it as a security box during storage, transportation, and the key can touch a dial lock and a general lock if I attach a key with an option.) This small folding plastic container is a one-of-a-kind product. It has a lock function that prevents the sides from falling over. The container has the following 7 features. (1) The height is lowered to 10 cm when folded. (It can be folded small, so you can reduce unnecessary space and transport costs. No tools are required for folding. Anyone can fold the container quickly and easily, which is useful in improving work efficiency. Assembly or disassembly takes only 30 seconds.) (2) Small lot production. (Our Minibo small folding plastic containers can be manufactured in small lots. We can make made-to-order containers starting from a single case.) (3) The product can be made in any size, although the height should be smaller than the depth. (We can make Minibo folding plastic containers according to the dimensions and design the customer wants. We can also propose an optimal product for the customer’s uses in terms of the shape, size, and weight.) (4) A wealth of options. (The Minibo folding plastic container comes in various shapes and materials. We can offer optimal specifications for the customer’s needs.) (5) Returnable. (Adopting a returnable container reduces the running cost and also waste, as well as resource and energy consumption. You can contribute to the environment and reduce waste to zero by combining it with our Saibo large returnable folding container and replacing all your containers. ) (6) The container is equipped with a lock function so the sides will not fall over. (This lock function ensures that the sides will not fall over to the inside. The contents will not be damaged or lost due to falling sides. You can use the container for stacking and transportation without worry.) (7) The container can be used as a security box. (The container can be used as a security box during storage or transportation when an optional key is attached. We can attach a combination lock or an ordinary lock.)
[Product description] Six characteristics of the reproduction resin palette (エコマウッドパレット) ① Complete recycling materials (all the materials reproduce from abolished plastic and are the product which it is the recycling environmental material which is recyclable after use, and is eco-friendly again.) ② I am strong in a shock (because the inside foams in エコマウッド, it is the material which is strong for a shock.) ③ I am not corrupt (because there is extremely few it, and a 含水率, water supply rate does not corrode it because it is made of plastic, it is a superior material, and, as for the strength deterioration with the rain, there are none by the outdoors storage in the durability, medicine characteristics-resistant.) ④ The surface the touch (the surface is like the bark, and is materials with the warmth of the cortex.) of the cortex ⑤ It is easy to do processing (like a tree palette, I hit the screw and drive a nail, and I can process cutting, a perforator, the chamfering, and the repair of the palette is possible again, too.) ⑥ I have abundant size of the material (there are 15 kinds of boards, squared lumber 15 kinds and large number of size and there is the length to 4m, too and can produce palettes with an adjustable size from one piece.) Our recycled resin pallets (Ecomawood pallets) have the following 6 features. (1) They are completely made of recycled material. (All the materials are reproduced from waste plastics, and the product can be recycled after use. It is an environmentally friendly recycling material.) (2) Shock resistant. (The interior of Ecomawood is a foamed material that is resistant to shocks.) (3) No corrosion. (Plastics excel in durability and chemical resistance because they have extremely low water content or supply and they do not corrode. There will be no strength degradation from rain and other factors even if the pallets are stored outside.) (4) The surface has a wood texture. (The bark-like surface offers the warmth of wood.) (5) Workability. (You can perform work on the pallets just like wooden pallets. This includes screwing, nailing, cutting, drilling, and chamfering. The pallets can be repaired.) (6) The material comes in various sizes. (There are 15 types of planks and 15 types of square timber, with varying lengths up to 4 m. We can make a pallet in any size from a single plank.)
[Product description] Simple folding restroom "convenience " can speak the use the storage for the disaster as an assembling restroom for the normal disaster, too, and I only fit it, and a Japanese style restroom changes quickly in the Western style restroom. If the assembling is easy and opens a pedestal and hit an emergency bag and pours a toilet seat, there is it in ten seconds. Because it is waterproofing (the emergency bag is not included), the washing in water is possible, too. Because weight is 960 g, it is lightweight and is convenient for carrying around. Because it is all resin made of polypropylene, I can handle it as the same recycling. Our Benri-da-wa simple folding toilet (stored disaster goods) can be used as a normal assembly toilet, or to convert a squatting-style toilet to a sitting-type toilet by simply attaching it. It can be easily assembled in 10 seconds by spreading its base, attaching an emergency bag, and covering the seat (the emergency bag does not come with the product). This product is also washable because it is waterproof. It weighs only 960 grams, and can be carried around easily. Its body is entirely made of polypropylene resin, and can be recycled without any preprocessing.
[Product description] The size of the simple locker room "own space" made of folding plastic is 1.9m in height, 1.1m in width, 1.1m in depth. When I cover a tray with a cap, and the size folds a frame panel at 0.1m in height, 1.1m in width, 1.1m in depth, it is to 0.08m in height, 1.1m in width, 1.9m in length, and the folding is compact. I open a wing of the back side of the tray, and the assembling procedure widens a frame panel and covers outside of a tray. And I cover with a cap from the outside of the frame panel. I open a door and, from the inside, fix the magic tape of the tray cap with a frame panel. It is completion. It is the completion in approximately three minutes. The dimensions of our Ji Kukan simple folding plastic changing room are 1.9 m (H) × 1.1 m (W) × 1.1 m (D). It can be as small as 0.1 m (H) × 1.1 m (W) ×1.1 m (D) when folded with its cap on the tray. It can be more compact if the frame panel is folded, with a size of 0.08 m (H) × 1.1 m (W) × 1.9 m (L). Assembly involves spreading the wings on the back of the tray, spreading the frame panel, and using it to cover the area around the tray. The cap is then put on from the outside. Open the door, and fix the frame panel with a Velcro attached to the tray and cap. Assembly is completed in about three minutes.
[Company strength] Our company has been designing, manufacturing, and packaging wooden containers for the export of heavy goods since its establishment in 1954. This technology has allowed us to develop environmentally friendly large folding plastic containers. We use them to propose, manufacture, and sell customized folding containers for individual users. Our containers are adopted by many companies for domestic transport and exports. We also applied our resin manufacturing technology to planning, designing, manufacturing, and selling emergency supplies, which have recently been increasing in importance. These products have been adopted in many sectors. [Business description] We offer wrapping and packaging as well as transportation services. We manufacture and sell packaging materials. These include large and small folding plastic containers, various plastic dividers, cushioning materials, cardboard cases, wooden containers for exports, wooden pallets, corrugated cardboard pallets, and recycled resin pallets. We also offer reinforced corrugated fiberboard, corrugated plastic boxes, polyethylene sheets, and polyethylene bags. We manufacture and sell emergency supplies. These include various simple folding plastic toilets, partitions, beds, changing rooms, sandbag stations, reserved firewood, plastic security boxes, and so on. [Industry] Industrial container manufacturing [Strength of products/technologies] Our large folding plastic container makes use of some of the patented technologies we have obtained. It is uniquely structured in that all of the 6 sides can be taken apart, and it can be folded into one-quarter of the original volume. Various models have been planned, manufactured, and sold from a base model, which is a lightweight container of around 28 kg, with pressure resistance of 4,700 kgf. We apply the same thermal resin processing to a simple folding toilet as a disaster-related product. It is manufactured using a thick corrugated plastic box by sealing the end surfaces and welding the hinges. This is why the toilet is lightweight and easy to assemble while having sufficient strength. [Representative's message] Our company does business under the motto of proposing a new environmentally friendly distribution system that meets customer needs. We are part of the recycling society, and we have actively accumulated know-how on how to introduce more returnable goods to the distribution system. We strongly feel that it is very important to further enhance this know-how and spread it throughout Japan, while replacing existing containers with our returnable products in Japan and overseas. We will also promote the adoption of disaster-related goods in Japan and other countries that have the same concerns, as these goods have been attracting attention in recent years. [Company structure for market development/overseas expansion] Some staff members in the sales department are in charge of new customers, and contact persons for major companies also belong to the sales department. Technical issues are responded to by members of the technology department or production department (mostly by 4 technology development engineers), and they solve problems whenever necessary. We are preparing an organization to conduct business in English and Japanese for overseas companies. We are not yet ready to respond to inquiries from other countries, but we will continue to nurture global human resources. These will include people with experience in international logistics, international accounting, and international sales. [Awards and media coverage] [Awards] [Media] Nikkan Kogyo Shimbun (reusable folding container). [Authorization/Certification] KES Environmental Management System Standard Step 2; forwarding agent license; warehousing license. [Joint research and development] Obtained 19 patents, including one for a returnable container (Japanese Patent No. 3101700). [Main Clients / Business History (domestic)] Mitsubishi Motors (large folding containers); Denso (large folding containers); Canon (large folding containers); Sumitomo Dainippon Pharma (large folding containers); Meito Sangyo (large folding containers); Yanmar (large folding containers); Asahi Kasei (large folding containers); Daiwa House (large folding containers); Ricoh (large folding containers); Teijin (large folding containers); Mitsubishi Plastics Industries (large folding containers); Kyoto City (folding toilets); East Japan Railway (folding changing rooms); Shimane prefectural government office (folding containers for storing emergency supplies).
- Kansai Head Office