GA-REW Co., Ltd.
We have developed a special nozzle that halves the amount of air used, and reduces power consumption.
Our company specializes in energy conservation and ecology, and develops cleaning instruments and air blow equipment. We have developed a special nozzle that sprays compressed air and fluid such as water or detergent. Its main feature is that the nozzle moves using the reaction force of the spray movement, and it does not use any source of power other than the compressed air. This function is applied to superfine particle sprayers, sonic washing machines, and other products.
[Product description] Our energy-saving Mechanical Swing Nozzle is an advanced, evolutionary air spray product that can reduce the amount of air used and improve productivity. It uses only half the amount of air as a common flat nozzle while multiplying the power five- or ten-fold. The nozzle swings at high speed by using the reaction force of the spray jet as its toggle mechanism. The resulting spray area is quite wide, with a single nozzle that does not dissipate the energy of the spray jet. The swing range is adjustable. The effective width of the air injection is around 300 mm. The actual effective width of the spray jet can be set up to about 500 mm. [Intellectual property] Swinging Nozzle (Japanese Patent No. 4926290).
[Product description] The Air Shock Gun generates powerful air by swinging or rotating itself. It combines jet power with its swinging or rotating power to generate low pressure but powerful Pulse Air. The nozzle moves with the reaction from the spray jet, so it can be easily used simply by attaching it to the air blow equipment you are using. The vibration of Pulse Air has a separating effect, so water and dirt can be removed cleanly from gutters, gaps, and hollows.
[Product description] Our GA-REW Brush Gun is a product that uses the synergy of the Pulse Air spray jet and brush vibration in its cleaning. It is suitable for removing shavings and dirt from previously difficult-to-clean tiny holes, and for cleaning precision machines and sections.
[Product description] Coating with chemicals by spraying them as superfine particles. Irregular work surfaces such as gutters, gaps, and hollows can be coated by mixing with Pulse Air, and making superfine particles with the Shock Gun nozzle. The particles do not drip, so it is suitable for coating with titanic oxide, sterilization chemicals, and anti-mold agents. [Intellectual property] Japanese Patent No.5646243
[Product description] Detergent is mixed with air to make a mousse before spraying. The mousse foam is light enough to adhere to the work surface without dripping. Detergent can be more effective when it adheres for a long time. Mixing it with air allows for efficient application to a wide area, which reduces the running cost. The detergent is sucked up by negative pressure, so no pressure is applied in the tank. This is a safe product. The product design allows the user to adjust the properties of the mousse. You can create a mousse to suit your preferences. [Intellectual property] Mousse Cleaning Equipment (Japanese Patent No. 4485021).
[Product description] Sonic Cleaner is the nursing care apparatus cleaner, that is utilizing GA-REW technology, such as Tornado and Brush Gun. Detergent consumption is two to three grams per one wheelchair. Working hour is about ten minutes. It is possible to conduct Washing, Rinsing, Draining and Drying with one machine. Because the water is sprayed with a form of fine particle, you do not need to treat wastewater. It is possible to control spray on/off and fluid rate with the gun, so you can get great working efficiency.
[Product description] ■Ultrafine Water Mist It is effective to reduce the friction, increase the blade durability, reduce the nicks in the edge and increase the speed, with spraying the water in a form of fine mist to cutting edge. Because it reduces the heat of friction, the cutting surface becomes smooth. It also removes the static electricity, and generates a lot of negative ion. EnviroIt is effective to reduce the friction, increase the blade durability, reduce the nicks in the edge and increase the speed, with spraying the water in a form of fine mist to cutting edge. Because it reduces the heat of friction, the cutting surface becomes smooth. It also removes the static electricity, and generates a lot of negative ion. ・Environmentally Friendly The sprayed water is a small quantity (about 0.5 mL/min.), so work hardly gets wet. Because it uses only water, it is environmentally friendly and requires no waste oil disposal.nmentally Friendly The sprayed water is a small quantity (about 0.5 mL/min.), so work hardly gets wet. Because it uses only water, it is environmentally friendly and requires no waste oil disposal. Generate a large amount of Fine Mist extensively with Specialized Nozzle ■Water Mist (Direct-connect to Water Supply) This mist generator is small and has simple mechanism. It is connected to existing water supply, and no need electric power without air compressor. It can generate super fine mist (The diameter is 5 to 10 micrometers.) Because it sprays Pulse Air generated with specialized nozzle, it can generate a large amount of mist, and there are many good effects, such as cooling (maximum: cooling down the temperature by 5 degrees at 2 meters distance), removing static electricity, generating negative ion.
[Product description] Powerful Type Air Shock Gun “Air Blaster” and downsized model “Air Blaster Mini”. Air Blaster/Mini can generate ultra high speed of 7000rpm at lower pressure (0.5MPa) than before. It can remove the dust powerfully, at lower energy. Nozzle cone has the stainless steel inner, so the life is extended than before. It does not use brush (contactless), so you can remove the fine metal burrs, dust and chips without damaging on surface of your important work. It is also effective to dust removal and draining of three-dimensional objects, such as groove, gap, recess and mesh.
[Company strength] All our products are specialty products that incorporate our own proprietary nozzles, so we have no competition. We usually lend a demo unit to interested customers and the customer purchases the product after using the demo unit in person and understanding its merits. We excel in developing and manufacturing products in a short amount of time to respond to requests from customers who used a demo unit, or who are actually using one. [Business description] Our company is a development manufacturer specialized in cleaning instruments. We incorporate our proprietary nozzle to spray compressed air or fluid such as water or detergent as a pulse flow. We also apply it to energy-saving and ecological air blow equipment. We aim to supply products that excel in cost performance. We accomplish this with R&D of user-friendly products that are both efficient and easy to handle from the customer’s point of view. We also continuously improve their performance. Our products have been adopted in the auto industry and in a wide range of other industries. This includes agriculture and stockbreeding, medical care and welfare, and construction and coating, in addition to electronics and food manufacturing plants. [Industry] Cleaning instrument manufacturing and development [Strength of products/technologies] Our proprietary nozzle moves using the reaction force from the air compressor and does not use any other power source. It reduces power consumption and related running costs significantly compared to conventional wide flat nozzles by halving the amount of air used, and by multiplying the power. We have applied this technology in other products using our patented special nozzle as the base. This includes superfine particle sprayers, sonic washing machines, micro deburring devices, and other devices to satisfy customer needs. These products have been adopted by various industrial machine manufacturers in their cleaning lines. [Representative's message] We have more than 250 sales companies in Japan. We hope to expand sales through visits by our technical sales representatives, and contribute to the future of Monozukuri craftsmanship by productizing our proprietary energy conserving technologies. Our sales channels are mostly limited to Japanese companies in Japan and Asia. However, we plan to actively participate in major overseas exhibitions such as the one in Las Vegas to expand sales in Europe and North America. [Company structure for market development/overseas expansion] We plan to actively attend business matching meetings, expand our company website and catalogs in English, and assign fluent personnel as sales representatives to prepare for overseas expansion. [Market share/Ranking] There is no competition as these are unique products. [Awards and media coverage] [Awards] The 4th Monozukuri Parts Award competition, Encouragement Award, 2007; the 10th Monozukuri Parts Award competition, Encouragement Award, 2013. [Media] TV Tokyo, coverage of our technology in the “Trend Tamago” corner of “World Business Satellite” (2005, 2009, and 2012), and so on. [Joint research and development] 2006-2007: Tokyo Metropolitan Institute of Technology and Tokyo Metropolitan University Graduate School of Engineering (report on nozzle jet cleaning characteristics, report on cleaning using a high-speed rotation flexible nozzle, report on sterilization experiments with an ozone mist cleaner, and so on). [Other sites] development laboratory, Chiba [Transaction form] Orders for trial manufacturing and development, OEM contracts, joint development, product sales, and so on. [Main Clients / Business History (domestic)] Toyota Auto Body Co., Ltd. (mechanical swing nozzles, since 2013), Denso Corporation (development and sales of custom nozzles, since 2005), Minebea Co., Ltd. (Air Shock Gun, since 2007), Bridgestone Corporation (cooling mist equipment, since 2008), Three Bond Co., Ltd., Apollo Retailing Co., Ltd., and many others. [Main Clients / Business History (overseas)] Tyco Electronics Corporation (Air Blaster); Bois Technology Ltd. (Tornado Cleaner 2); P.T. Omron Manufacturing of Indonesia (Air Shock Gun unit), and so on. [Exhibition History/Information] Pan-Exhibition for Wash and Clean 2012; International Food Machinery & Technology Exhibition (2011?2013); and so on. Mechanical Components & Materials Technology Expo 2014 (planned).
- Kanto Head Office